Buy Sangria | BASF | Effect Glazes

Quantity: 40 g. (1.41 oz.) 
Firing temperature: 980-1080°C (1800-1976° F) (Cone 04) 
Surface: mat
Luminescence: cover
Lead content: lead-free, 0% 

Description and Usage:

Sangria Liquid Glaze should be coated 2-3 times with a soft brush after first fire. After drying please fire between 1000-1080°C. Shake and stir very well prior to use. If the glase becomes thickened over time simply add water and stir thorougly.

Sangria Dry glaze is to be dissolved in water to thick paste which should be thinned to proper density. I recommend the proportion - 64%:36% (40g. glaze and 23ml. water). Mellowing and screening before use is pertinent. The glaze density depends on the way of application and on the body porosity. A thick porous bisque, which absorbes the water fast, requires rather a thinner glaze than a tighter, less porous body, which absorbes the water slowly. Each glaze is recommended to be tested with various layers on the body concerned and under determined conditions.  The mixing of the glazes is possible in order to change color shade, melting properties or to achieve some artistic effects. Sometimes the glaze coat can crawl due to the presence of dust, grease or dirt on the bisque. Glazed pieces have to be well dried before the firing. The firing temperature should correspond to given data. When fired less, the glaze will be rough and matte, fired hotter, the glaze runs down the piece or soaks into the body.